Home Gardening Pure Department Coasters: Minimize, Sand, and Seal Wooden Slices

Pure Department Coasters: Minimize, Sand, and Seal Wooden Slices


Have a tree limb that wants eradicating? Don’t simply toss that wooden away! As a substitute, use wooden slices to create a set of lovely, one-of-a-kind DIY coasters! These picket coasters will rapidly change into a dialog piece at any gathering…whereas additionally defending your furnishings from water rings and spills. Right here’s the right way to make a set of your individual.

diy wooden coasters made from wood slices on a table

Typically probably the most stunning DIYs are the best ones. Living proof? Making a set of department coasters from a fallen tree will enable the great thing about that wooden to reside on and inform the story in its rings.

If you end up out pruning and reducing again the backyard, check out what you might be about to throw within the wooden chipper or firewood pile. Wooden slices will be become many issues, however my all-time favourite is these department coasters that I made again in 2012.

I’ve had my cedar coasters now for nearly four years and have had loads of questions on the practicality of them. I’ve up to date this authentic article, with some FAQs on the finish of the DIY directions. In brief? I nonetheless love and use them day by day!

Enamel dig for victory mug and natural branch coasters made from wooden slices

It was a tragic day when the biggest, oldest tree on my avenue was hacked down and unceremoniously chucked into building waste bins. The 50’ Western Crimson Cedar nonetheless had numerous good years left, however bought in the best way of builders’ greenback indicators and no quantity of reasoning might sway them.

Neighbors got here to say goodbye, strolling by means of the wreckage, gathering a memento or two; tears have been shed. It’s superb the impression a tree can have and the immensity of the sense of loss for one handled with so little respect.

stack of wood slice coasters

I collected a number of thick branches to show into units of coasters that I’ll cross on to neighbors who bear in mind their youngsters climbing those self same limbs many, a few years in the past.

Even when you don’t have as private of a tree story, you’ll be able to nonetheless make these wooden slice coasters. Subsequent time you see a tree trimming crew at work, ask the house’s proprietor when you can have a department for a venture—chances are high, they are going to haven’t any downside gifting you with a department or two.

Wood slice coasters on a table

The venture is straightforward however it’ll take a while to chop and sand every bit. The extra time you spend getting them proper, the nicer the ultimate product shall be.


Make it!

1. Utilizing the noticed, minimize sections of branches which might be ½” thick.

2. Sand every part with heavy grit sandpaper, after which use a finer grit to easy out the floor. Don’t sand the bark on the perimeters.

3. Coat entrance, again, and sides with clear varnish and let dry. Untreated wooden may look stunning because it absorbs the drips and condensation from the glasses that sit on it.

How to Make Natural Branch Coasters

Elective: Add Designs with Wooden Burning

Whereas the wooden grain is gorgeous by itself, you could really feel like including an additional particular contact. An inexpensive wood burner, a little bit of time, and creativity are all it’s good to create designs similar to these.

pyrography wood burned coasters

See how to make wood-burned coasters in this post.

FAQ About These DIY Coasters

As I discussed above, I’ve gotten numerous questions on these picket coasters since creating this venture years in the past. I did my finest to reply probably the most incessantly requested ones right here, however if in case you have one which’s not addressed, please go away it within the feedback beneath!

Turning tree branches into coasters DIY project via Garden Therapy #coasters #recycle

How do you dry the wooden? How do you retain them from cracking?

I dried the wooden slowly in a cool, dry room earlier than reducing the coasters. Drying in a room that has restricted moisture and warmth permits the wooden to dry slowly and helps to forestall cracking. It took many months. I examined to see if the wooden was dry however reducing an finish part. Even with this course of, a number of cracked. I discarded these as I had a lot extra to work with.

What varnish/stain did you utilize?

I used Varathane clear satin varnish. The varnish was labeled as clear, nevertheless it does have a honey shade within the can. It made the ultimate coasters look a bit of darker than the dry wooden (like moist wooden), which I anticipated and like.

Don’t they leak sap?

No. Maybe a distinct sort of wooden might leak sap. However I dried the wooden totally and have by no means seen one drop of sap in four years of utilizing them.

Staining Natural Branch Coasters DIY project

How did you retain the bark on the outer edges?

The bark stayed on because of the kind of wooden, Western Crimson Cedar. I used to be cautious to not pull it off however it’s fairly sturdy. I did varnish the edges across the bark as properly.

Did you glue felt or something to maintain the coaster from marking the furnishings?

When sanded they’re easy so gained’t scratch something, and they’re varnished and dry in order that they don’t stain. You definitely might put felt or little ft on them when you select, although.

What can I do with these picket coasters?

In fact, you’ll be able to maintain and revel in them for years at residence, as I’ve. Nevertheless, if in case you have extras, these make a beautiful reward! Contemplate gifting a set of those coasters together with a mug and a set of tea or artisan coffee.

Any extra recommendation?

There are a lot extra concepts and suggestions within the feedback part. Have a learn over it and please chime in if in case you have any recommendation to share!

Extra Backyard Crafts to Attempt:

DIY Coasters from Wooden Slices

Learn to make your individual beautiful DIY coasters from wooden slices. When you’ve got a fallen tree, that is one of the best ways to protect and benefit from the grain for years to come back!


  • branches needs to be straight and at the least 3.5″ in diameter
  • sandpaper heavy grit + high quality grit
  • clear varnish non-compulsory, however really useful


  • Slice branches into half” thick items with the handsaw. Attempt to maintain the slices as even and straight as attainable.

  • Sand every wooden slice down utilizing the heavy grit paper first, then the high quality grit to easy it out. Do not sand the bark.

  • Wipe clear, then coat the entrance, again, and sides with a transparent varnish. That is non-compulsory, however can delay the lifetime of the picket coaster.